Low PIM RF Power Splitters

RF power splitters allow to split rf energy into equal parts as per number of its ports. Low PIM power splitters do not reflect incoming rf signals (low IL) and therefore avoid increase of noise levels in rf networks.
 
For high quality SNR 50Ω power splitters are deployed throughout every DAS network, typically to connect multiple directive antennas.
All PIM values of our power splitters are measured against IM3 (dBc@2*43dBm) and are lower than ≤-150dBc. Permissable power of all rf power splitters is 200W @ impedance of 50Ω. Environment rating of power splitters is IP65.
 

RF Power Splitter	Product ID	Picture	Connector	Frequency (MHz)	Insertion Loss (dB)	Ripple in band (dB)
2-ways	13001787		DIN Female	698-2700MHz	3.3	0.3
3-ways	13001788		DIN Female	698-2700MHz	5.2	0.4
4-ways	13001789		DIN Female	698-2700MHz	6.4	0.5
2-ways	13001790		N Female	698-2700MHz	3.3	0.3
3-ways	13001791		N Female	698-2700MHz	5.2	0.4
4-ways	13001792		N Female	698-2700MHz	6.4	0.5
2-ways	13001793		4.3-10	698-2700MHz	3.3	0.3
3-ways	13001794		4.3-10	698-2700MHz	5.2	0.4
4-ways	13001795		4.3-10	698-2700MHz	6.4	0.5
2-ways	13001796		4.3-10	555-2700MHz	3.3	0.3
3-ways	13001797		4.3-10	555-2700MHz	5.2	0.4
4-ways	13001798		4.3-10	555-2700MHz	6.4	0.5
6-ways	13001799		4.3-10	698-2700MHz	8.2	0.5
3-ways	13001800		4.1-9.5 (Mini DIN)	698-2700MHz	5.2	0.4

Please contact us for your specific project requirements: sales@oc2me.com