Low PIM RF Terminators and Variable Attenuators
RF terminators allow a complete absorbtion of rf signals. The energy of rf waves is transformed into heat. Low PIM attenuators do not reflect rf signals and therefore help to avoid increase of unwanted noise levels in rf networks.
For qualified SNR 50Ω terminators and attenuator are deploy throughout every DAS network.
Variable attenuators are often used to fine-tune networks and in test&measurement. All PIM values of our terminators and attenuators are measured against IM3 (dBc@2*43dBm) and are lower than ≤-150dBc. Permissable power is depending on the model and range from 2W to 200W. Higher rated attenuator up to 2000W are available on request. All terminators have an impedance of 50Ω and are rated IP65.
|Terminator||Product ID||Picture||Connector||Frequency (MHz)||VSWR||Weight|
|10 Watts||13001768||N male||DC-3GHz||1.2||90g|
|25 Watts||13001769||N male||DC-3GHz||1.25||210g|
|50 Watts||13001770||N male||DC-3GHz||1.2||304g|
|100 Watts||13001771||N male||DC-3GHz||1.2||1.3kg|
|200 Watts||13001772||DIN female||DC-3GHz||1.2||2.0kg|